Lighting:  Connects to Clipsal C-Bus, so the home owner can control all of the devices connected to their lighting control system including:

 
The devices on the home network can be controlled on an easy to use interface with either a customised floor plan view or by device type.

The integrator can program basic logic commands using the integrator interface or for more complex logic utilise scripting languages such as VB script.

 
Irrigation:  Completely manage your garden irrigation requirements. The number of irrigation zones is configuable to the project and each irrigation zone can have unique settings allowing your garden to be comprehensively controlled.

Scene:  Combine several commands into one button so that you can create the exact mood or environment with one button press. A "Welcome Home" scene can create an exact environment with evening lighting, floor heating, music and blinds all adjusted to your desired settings. Tie that scene to the "Alarm Disarming" event for the hours 5.00-9.00pm and you dont even need to press a button.

Timers and Schedules:  Any series of commands can be programmed behind a timer device. The home owner then decides when those events will be run. An "Evening Lighting" home timer might lower the blinds, adjust the floor heating and turn on the garden and entry lighting. This timer can be adjusted by the home owner to run at 4.30pm in winter and 7.00pm in summer. Or simply set the timer to a given time before sunset so the timer automatically follows the seasons.

Window Coverings:  Control blinds, vergolas, shutters, louvres, shades and more with Intentional Control.  Add the control of these devices into timers for a fully automated solution. Align the timers to a given time before or after sunrise/sunset to conserve energy.

Enviromental Control:  Switch Control has a full two-way driver for the Advantage air conditioning control. The two way driver means that the following can be achieved: